NIKON
Blue laser technology, ultra-fast data rates, especially developed Nikon optics and the ability to measure the most challenging parts in fine detail combine to enable the cutting-edge ModelMaker H120 to push the exacting boundaries of handheld laser scanning productivity.
Sale [ New ] Nikon ModelMaker H120 - Handheld 3D Laser Scanner - Best Price (ModelMaker H120)
The cutting-edge ModelMaker H120 firmly pushes the ever-exacting boundaries of handheld laser scanning. Incorporating blue laser technology, ultra-fast frame rate, specially developed Nikon optics and the ability to measure the most challenging parts represents the next generation of portable laser scanning. The H120 makes no compromises in addressing the market needs by efficiently delivering the most detailed and accurate data in a fraction of the time of competing technologies – no matter the size or the material.
ModelMaker H120 is a class-leading handheld 3D laser scanner, delivering extremely detailed and precise high-speed measurement results on almost any material or part
Uncompromising performance – The ModelMaker H120 guarantees fast data collection over a large area with no compromise on small details – offering great flexibility in a single solution even when cycle time is critical, no matter the type of parts measured.
By combining a frame rate of 450 Hz, a stripe width up to 120 mm and non-interpolated point spacing of 35 μm, users benefit from high productivity and detailed measurements optimized within a single sensor.
The MCAx S arm further enhances the user experience by adding the ability to scan truly cable-free, through high-speed Wi-Fi connectivity and battery power with absolutely no reduction in speed, quality or data coverage.
Measure the most challenging materials – Patented Enhanced Sensor Performance (ESP4) provides automatic real-time adjustment of the laser intensity for every single point in the same image frame ensuring full data regardless of the laser line spanning materials of completely different optical properties.
Measure high contrast reflectivity changes, highly absorptive coatings, near-mirrored finishes and near-transparent materials with no reduction in data rate, even when scanning wirelessly.
Intelligent reflection control further refines measurements of very shiny or polished materials by filtering out unwanted reflections.
Low noise data and very fine details – Expertly crafted bespoke in-house lens design enables the smallest structural resolution and lowest noise measurements in handheld scanning.
The specially developed Nikon optics and hand-assembled low-speckle blue laser source technology provide incredible details such as surface texture, very sharp edges and even dust, scratches and abrasions.
Nikon does not use interpolation techniques to increase data rates. Every point is an optically measured point.
Increased feature measurement precision – The incredible dynamic range, pin sharp optics of the ModelMaker H120 and the flexibility of movement and accuracy of the MCAx S arm combine to provide measurements of parts other solutions cannot deliver.
Geometric feature measurements are more exact than ever due to the clarity of data on thin-walled parts such as sheet metal, giving much more statistical information for truly repeatable feature fitting or trim edge extraction than can be achieved using tactile CMM technology.
This allows precise form inspection, reaching a level of detail far beyond traditional position, size and orientation.
Start measuring immediately – System set-up requires no special network settings, boots-up within seconds and eliminates warm-up thanks to scanner thermal compensation. Paired with the structural rigidity, thermal stability and absolute encoder technology of the MCAx S arms, users can switch on and start confidently collecting accurate data straightaway.
Enhanced user experience – Innovative and valuable functionality such as contrasting full field of view projector, excellent tactile probe clearance, compact size and ability to measure almost any part without changing settings gives the user all the assurance and feedback needed to concentrate purely on the measurement task.
Ultra-Fast High-Definition 3D Scanning
Blue laser technology, ultra-fast data rates, especially developed Nikon optics and the ability to measure the most challenging parts in fine detail combine to enable the cutting-edge ModelMaker H120 to push the exacting boundaries of handheld laser scanning productivity.
Detail
Nikon’s made-to-order optics and low-noise, blue laser technology provide incredible detail and clarity of results, far beyond just 3D part shape and feature size and position.
Accuracy
Class-leading handheld scanner accuracy of just 7 microns ensures precision scan data, enabling non-contact measurement of higher tolerance parts, regardless of size.
Productivity
From shop floor to measurement lab, easily capture 3D scan data at very high speed on almost any combination of material and surface finish.
SPECS :
Points Per Stripe Up to 2000 (non-interpolated)
Frame Rate Up to 450 Hz
Point Resolution Up to 35 u03bcm
Stripe Width Up to 120 mm
Measurement Depth Up to 100 mm
Accuracy (1 sigma) 7 u03bcm
Measuring Laser Blue, Class 2
Full FoV Indicator Laser Red, Class 2
Temperature Compensation Yes (no warm up)
Laser Power Adjustment ESP4 real-time per point
Also you can check : Sale New GOM Scan 1 Mobile 3D Scanner [ Small Scanner ] - Best Price
ModelMaker H120 is a class-leading handheld 3D laser scanner, delivering extremely detailed and precise high-speed measurement results on almost any material or part
Uncompromising performance – The ModelMaker H120 guarantees fast data collection over a large area with no compromise on small details – offering great flexibility in a single solution even when cycle time is critical, no matter the type of parts measured.
By combining a frame rate of 450 Hz, a stripe width up to 120 mm and non-interpolated point spacing of 35 μm, users benefit from high productivity and detailed measurements optimized within a single sensor.
The MCAx S arm further enhances the user experience by adding the ability to scan truly cable-free, through high-speed Wi-Fi connectivity and battery power with absolutely no reduction in speed, quality or data coverage.
Measure the most challenging materials – Patented Enhanced Sensor Performance (ESP4) provides automatic real-time adjustment of the laser intensity for every single point in the same image frame ensuring full data regardless of the laser line spanning materials of completely different optical properties.
Measure high contrast reflectivity changes, highly absorptive coatings, near-mirrored finishes and near-transparent materials with no reduction in data rate, even when scanning wirelessly.
Intelligent reflection control further refines measurements of very shiny or polished materials by filtering out unwanted reflections.
Low noise data and very fine details – Expertly crafted bespoke in-house lens design enables the smallest structural resolution and lowest noise measurements in handheld scanning.
The specially developed Nikon optics and hand-assembled low-speckle blue laser source technology provide incredible details such as surface texture, very sharp edges and even dust, scratches and abrasions.
Nikon does not use interpolation techniques to increase data rates. Every point is an optically measured point.
Increased feature measurement precision – The incredible dynamic range, pin sharp optics of the ModelMaker H120 and the flexibility of movement and accuracy of the MCAx S arm combine to provide measurements of parts other solutions cannot deliver.
Geometric feature measurements are more exact than ever due to the clarity of data on thin-walled parts such as sheet metal, giving much more statistical information for truly repeatable feature fitting or trim edge extraction than can be achieved using tactile CMM technology.
This allows precise form inspection, reaching a level of detail far beyond traditional position, size and orientation.
Start measuring immediately – System set-up requires no special network settings, boots-up within seconds and eliminates warm-up thanks to scanner thermal compensation. Paired with the structural rigidity, thermal stability and absolute encoder technology of the MCAx S arms, users can switch on and start confidently collecting accurate data straightaway.
Enhanced user experience – Innovative and valuable functionality such as contrasting full field of view projector, excellent tactile probe clearance, compact size and ability to measure almost any part without changing settings gives the user all the assurance and feedback needed to concentrate purely on the measurement task.
Ultra-Fast High-Definition 3D Scanning
Blue laser technology, ultra-fast data rates, especially developed Nikon optics and the ability to measure the most challenging parts in fine detail combine to enable the cutting-edge ModelMaker H120 to push the exacting boundaries of handheld laser scanning productivity.
Detail
Nikon’s made-to-order optics and low-noise, blue laser technology provide incredible detail and clarity of results, far beyond just 3D part shape and feature size and position.
Accuracy
Class-leading handheld scanner accuracy of just 7 microns ensures precision scan data, enabling non-contact measurement of higher tolerance parts, regardless of size.
Productivity
From shop floor to measurement lab, easily capture 3D scan data at very high speed on almost any combination of material and surface finish.
SPECS :
Points Per Stripe Up to 2000 (non-interpolated)
Frame Rate Up to 450 Hz
Point Resolution Up to 35 u03bcm
Stripe Width Up to 120 mm
Measurement Depth Up to 100 mm
Accuracy (1 sigma) 7 u03bcm
Measuring Laser Blue, Class 2
Full FoV Indicator Laser Red, Class 2
Temperature Compensation Yes (no warm up)
Laser Power Adjustment ESP4 real-time per point
Also you can check : Sale New GOM Scan 1 Mobile 3D Scanner [ Small Scanner ] - Best Price
Blue laser technology, ultra-fast data rates, especially developed Nikon optics and the ability to measure the most challenging parts in fine detail combine to enable the cutting-edge ModelMaker H120 to push the exacting boundaries of handheld laser scanning productivity.
- 1