Intel Realsense
The Intel RealSense LiDAR Camera L515 gives precise volumetric measurements of objects. Use the L515 on a handheld device or as part of an inventory management system for quickly counting objects on a shelf, or track every pallet that leaves your warehouse to make sure it's fully loaded with the right inventory.
The D457 depth camera adds a GMSL serializer and FAKRA connector to the Intel RealSense camera product line. GMSL/FAKRA is a lower power, lower ESD/EMI noise, lower latency and longer cable length compared to USB and higher bandwidth compared to Ethernet.The camera integrates an IMU to allow your application to refine its depth awareness in any situation where the camera moves. This allows improved environmental awareness for robotics and drones.
Introducing the latest addition to the family, the Intel RealSense Depth Camera D455. The D455 is the fourth in the D400 series, designed from feedback and knowledge gained from over 10 years of stereo camera development.The D455 extends the distance between the depth sensors to 95 mm which improves the depth error to less than 2% at 4 m.
The depth camera D435i is part of the Intel® RealSense™ D400 series of cameras, a lineup that takes Intel’s latest depth‑sensing hardware and software and packages them into easy‑to‑integrate products. Perfect for developers, makers, and innovators looking to bring depth sensing to devices, Intel® RealSense™ D400 series cameras offer simple out‑of‑the‑box integration and enable a whole new generation of intelligent vision‑equipped solutions.
Sale [ New ] Intel RealSense L515 LiDAR depth camera - Sealed Box (L515)
The Intel RealSense L515 is a revolutionary solid state LiDAR depth camera which uses a proprietary MEMS mirror scanning technology, enabling better laser power efficiency compared to other time‑of‑flight technologies. With less than 3.5W power consumption for depth streaming, the Intel RealSense LiDAR camera L515 is the world’s most power efficient high‑resolution LiDAR camera.
With its internal vision processor, motion blur artifact reduction and short photon to depth latency, the L515 is the right solution for capturing even rapidly moving objects with minimal motion blur.
First in the family
Intel® is proud to introduce a revolutionary solid-state LiDAR depth technology designed for indoor applications. The first product in the new LiDAR depth family, the Intel RealSense LiDAR Camera L515 is perfect for applications that require depth data at high resolution and high accuracy.
Redefining computer vision with Intel RealSense LiDAR
The L515 is a revolutionary solid state LiDAR depth camera which uses a proprietary MEMS mirror scanning technology, enabling better laser power efficiency compared to other time‑of‑flight technologies. With less than 3.5W power consumption for depth streaming, the Intel RealSense LiDAR camera L515 is the world’s most power efficient high‑resolution LiDAR camera.
Logistics and Measurement
The Intel RealSense LiDAR Camera L515 gives precise volumetric measurements of objects. Use the L515 on a handheld device or as part of an inventory management system for quickly counting objects on a shelf, or track every pallet that leaves your warehouse to make sure it's fully loaded with the right inventory.
Optimized for robotics
While all Intel RealSense Depth cameras are necessary components in an intelligent autonomous robotic solution, the Intel RealSense LiDAR camera L515 brings an additional level of precision and accuracy over its entire operational range. Quickly gauge complex objects, handle occlusion or objects behind others with ease for a new level of performance in bin picking or grasping.
3D Scanning
With 3D scanning, one of the biggest challenges is edge fidelity - making sure that objects don't bleed into the background or each other. The Intel RealSense LiDAR Camera L515, has edge fidelity in a class of its own, combined with a quality FHD RGB camera and IMU for more robust handheld scanning solutions. Together these features make the L515 the best option for taking your 3D scanning to the next level.
Computer vision in robotics comes into focus.
In the last few years demand for computer vision technology that reliably works and performs across a variety of conditions has grown rapidly. Learn more about how robots see and understand the world.
Easy transition with the Intel RealSense SDK 2.0
Our open‑source SDK 2.0 offers a variety of wrappers supporting popular programming languages and platforms. The newest addition to the Intel RealSense Technology family uses the same SDK as all other current generation devices, allowing an easy transition from any of our other depth cameras. Develop once and deploy on any current or future Intel RealSense depth device.
Technical Data :
Features
Use environment:
Indoor
Technology:
Laser scanning
Ideal range:
.25 m to 9 m[1]
(Range affected by reflectivity)
Depth
Depth technology:
LiDAR
Minimum depth distance
(Min-Z) at max resolution:
~25 cm
Depth Accuracy:
~5 mm to ~14 mm thru 9 m2Depth Field of View (FOV):
70° × 55° (±3°)
Depth output resolution:
Up to 1024 × 768
Depth frame rate:
30 fps
RGB
RGB frame resolution:
1920 × 1080
RGB frame rate:
30 fps
RGB sensor technology:
Rolling Shutter
RGB sensor FOV (H × V):
70° × 43° (±3°)
RGB sensor resolution:
2 MP
Major Components
Processing:
Intel RealSense Vision ASIC
Optical board:
– Laser
– MEMS Mirror
Physical
Form factor:
Camera Peripheral
Diameter × Height:
61 mm × 26 mm
Connectors:
USB‑C* 3.1 Gen 1*
Mounting mechanism:
– One 1/4‑20 UNC thread mounting point.
– Two M3 thread mounting points.
– Tripod
INCLUDED :
1 x LiDAR camera
1 x USB-C to USB cable
1 x Tripod
1 x Instruction Manual
With its internal vision processor, motion blur artifact reduction and short photon to depth latency, the L515 is the right solution for capturing even rapidly moving objects with minimal motion blur.
First in the family
Intel® is proud to introduce a revolutionary solid-state LiDAR depth technology designed for indoor applications. The first product in the new LiDAR depth family, the Intel RealSense LiDAR Camera L515 is perfect for applications that require depth data at high resolution and high accuracy.
Redefining computer vision with Intel RealSense LiDAR
The L515 is a revolutionary solid state LiDAR depth camera which uses a proprietary MEMS mirror scanning technology, enabling better laser power efficiency compared to other time‑of‑flight technologies. With less than 3.5W power consumption for depth streaming, the Intel RealSense LiDAR camera L515 is the world’s most power efficient high‑resolution LiDAR camera.
Logistics and Measurement
The Intel RealSense LiDAR Camera L515 gives precise volumetric measurements of objects. Use the L515 on a handheld device or as part of an inventory management system for quickly counting objects on a shelf, or track every pallet that leaves your warehouse to make sure it's fully loaded with the right inventory.
Optimized for robotics
While all Intel RealSense Depth cameras are necessary components in an intelligent autonomous robotic solution, the Intel RealSense LiDAR camera L515 brings an additional level of precision and accuracy over its entire operational range. Quickly gauge complex objects, handle occlusion or objects behind others with ease for a new level of performance in bin picking or grasping.
3D Scanning
With 3D scanning, one of the biggest challenges is edge fidelity - making sure that objects don't bleed into the background or each other. The Intel RealSense LiDAR Camera L515, has edge fidelity in a class of its own, combined with a quality FHD RGB camera and IMU for more robust handheld scanning solutions. Together these features make the L515 the best option for taking your 3D scanning to the next level.
Computer vision in robotics comes into focus.
In the last few years demand for computer vision technology that reliably works and performs across a variety of conditions has grown rapidly. Learn more about how robots see and understand the world.
Easy transition with the Intel RealSense SDK 2.0
Our open‑source SDK 2.0 offers a variety of wrappers supporting popular programming languages and platforms. The newest addition to the Intel RealSense Technology family uses the same SDK as all other current generation devices, allowing an easy transition from any of our other depth cameras. Develop once and deploy on any current or future Intel RealSense depth device.
Technical Data :
Features
Use environment:
Indoor
Technology:
Laser scanning
Ideal range:
.25 m to 9 m[1]
(Range affected by reflectivity)
Depth
Depth technology:
LiDAR
Minimum depth distance
(Min-Z) at max resolution:
~25 cm
Depth Accuracy:
~5 mm to ~14 mm thru 9 m2Depth Field of View (FOV):
70° × 55° (±3°)
Depth output resolution:
Up to 1024 × 768
Depth frame rate:
30 fps
RGB
RGB frame resolution:
1920 × 1080
RGB frame rate:
30 fps
RGB sensor technology:
Rolling Shutter
RGB sensor FOV (H × V):
70° × 43° (±3°)
RGB sensor resolution:
2 MP
Major Components
Processing:
Intel RealSense Vision ASIC
Optical board:
– Laser
– MEMS Mirror
Physical
Form factor:
Camera Peripheral
Diameter × Height:
61 mm × 26 mm
Connectors:
USB‑C* 3.1 Gen 1*
Mounting mechanism:
– One 1/4‑20 UNC thread mounting point.
– Two M3 thread mounting points.
– Tripod
INCLUDED :
1 x LiDAR camera
1 x USB-C to USB cable
1 x Tripod
1 x Instruction Manual
The Intel RealSense LiDAR Camera L515 gives precise volumetric measurements of objects. Use the L515 on a handheld device or as part of an inventory management system for quickly counting objects on a shelf, or track every pallet that leaves your warehouse to make sure it's fully loaded with the right inventory.
Sale [ New ] Intel RealSense D457 depth camera - Best Price (D457)
IP65 rated GMSL FAKRA.
Secure Performance.
The Intel® RealSense™ Depth Camera D457 is our first GMSL/FAKRA high bandwidth stereo camera. The D457 has an IP65 grade enclosure protecting it from dust ingress and projected water.
What is GMSL/FAKRA?
Gigabit Multimedia Serial Link (GMSL) is a multigigabit, point-to-point connection targeting the automotive space. GMSL supports multistream over a single cable, up to 15m with a coax cable. GMSL is a high performance protocol combined with a secure FAKRA connector making it best suited for robotic and warehouse applications.
Why GMSL/FAKRA?
The D457 depth camera adds a GMSL serializer and FAKRA connector to the Intel RealSense camera product line. GMSL/FAKRA is a lower power, lower ESD/EMI noise, lower latency and longer cable length compared to USB and higher bandwidth compared to Ethernet.
An IMU inside.
The camera integrates an IMU to allow your application to refine its depth awareness in any situation where the camera moves. This allows improved environmental awareness for robotics and drones.
Best for Autonomous Mobile Robots
Adding automotive-grade FAKRA connector , GMSL high speed serializer and IP65 grade enclosure makes it the best fit for autonomous mobile robots (AMR), automotive infotainment and driver monitoring.
Long range with GMSL/FAKRA interface
The D457 is comprised of the same D450 optical module used in the D455 camera with a new Vision Processor D4 Board V5. It has the same long range KPIs as the D455 with the benefits of the secure GMSL/FAKRA connector and IP65 grade.
On-chip calibration over MIPI.
Intel RealSense SDK 2.0 now provides an on‑chip self‑calibration option for your D457 stereo camera. This allows camera calibration in less than 15 seconds without the need for specialized targets. Hassle free!
Computer vision in robotics comes into focus.
In the last few years demand for computer vision technology that reliably works and performs across a variety of conditions has grown rapidly. Learn more about how robots see and understand the world.
Easy integration
The D457 is supported with the same cross-platform open-source Intel® RealSense™ SDK 2.0, with a separate kernel driver package for the GMSL serializer. It is tested and verified on leading platforms with GMSL de-serializer and FAKRA connector.
TECHNICAL DATA :
FeaturesUse environment:
Indoor/Outdoor
Image sensor technology:
Global ShutterIdeal Range:
.6 m to 6 m
Inertial measurement unit:
Bosch BMI085
DepthDepth technology:
Stereoscopic
Minimum Depth Distance (Min-Z) at Max Resolution:
~52 cm
Depth Accuracy:
<2% at 4 m(1)Depth Field of View (FOV):
87° × 58°
Depth output resolution:
Up to 1280 × 720
Depth frame rate:
Up to 90 fps
RGB
RGB frame resolution:
Up to 1280 × 800
RGB frame rate:
30 fps
RGB sensor technology:
Global ShutterRGB sensor FOV (H × V):
90 × 65°
RGB sensor resolution:
1 MP
Major Components
Camera module:
Intel RealSense Module D450
Vision Processor Board:
Intel RealSense Vision Processor D4 Board V5
PhysicalForm factor:
Camera Peripheral
Length × Height × Depth:
124 mm × 26 mm × 36 mm
Connectors:
GMSL/FAKRA (2)
Mounting mechanism:
– One 1/4‑20 UNC thread mounting point
– Two M4 thread mounting points
– Tripod
You can also check : Sale New Intel RealSense L515 LiDAR depth camera - Sealed Box
Secure Performance.
The Intel® RealSense™ Depth Camera D457 is our first GMSL/FAKRA high bandwidth stereo camera. The D457 has an IP65 grade enclosure protecting it from dust ingress and projected water.
What is GMSL/FAKRA?
Gigabit Multimedia Serial Link (GMSL) is a multigigabit, point-to-point connection targeting the automotive space. GMSL supports multistream over a single cable, up to 15m with a coax cable. GMSL is a high performance protocol combined with a secure FAKRA connector making it best suited for robotic and warehouse applications.
Why GMSL/FAKRA?
The D457 depth camera adds a GMSL serializer and FAKRA connector to the Intel RealSense camera product line. GMSL/FAKRA is a lower power, lower ESD/EMI noise, lower latency and longer cable length compared to USB and higher bandwidth compared to Ethernet.
An IMU inside.
The camera integrates an IMU to allow your application to refine its depth awareness in any situation where the camera moves. This allows improved environmental awareness for robotics and drones.
Best for Autonomous Mobile Robots
Adding automotive-grade FAKRA connector , GMSL high speed serializer and IP65 grade enclosure makes it the best fit for autonomous mobile robots (AMR), automotive infotainment and driver monitoring.
Long range with GMSL/FAKRA interface
The D457 is comprised of the same D450 optical module used in the D455 camera with a new Vision Processor D4 Board V5. It has the same long range KPIs as the D455 with the benefits of the secure GMSL/FAKRA connector and IP65 grade.
On-chip calibration over MIPI.
Intel RealSense SDK 2.0 now provides an on‑chip self‑calibration option for your D457 stereo camera. This allows camera calibration in less than 15 seconds without the need for specialized targets. Hassle free!
Computer vision in robotics comes into focus.
In the last few years demand for computer vision technology that reliably works and performs across a variety of conditions has grown rapidly. Learn more about how robots see and understand the world.
Easy integration
The D457 is supported with the same cross-platform open-source Intel® RealSense™ SDK 2.0, with a separate kernel driver package for the GMSL serializer. It is tested and verified on leading platforms with GMSL de-serializer and FAKRA connector.
TECHNICAL DATA :
FeaturesUse environment:
Indoor/Outdoor
Image sensor technology:
Global ShutterIdeal Range:
.6 m to 6 m
Inertial measurement unit:
Bosch BMI085
DepthDepth technology:
Stereoscopic
Minimum Depth Distance (Min-Z) at Max Resolution:
~52 cm
Depth Accuracy:
<2% at 4 m(1)Depth Field of View (FOV):
87° × 58°
Depth output resolution:
Up to 1280 × 720
Depth frame rate:
Up to 90 fps
RGB
RGB frame resolution:
Up to 1280 × 800
RGB frame rate:
30 fps
RGB sensor technology:
Global ShutterRGB sensor FOV (H × V):
90 × 65°
RGB sensor resolution:
1 MP
Major Components
Camera module:
Intel RealSense Module D450
Vision Processor Board:
Intel RealSense Vision Processor D4 Board V5
PhysicalForm factor:
Camera Peripheral
Length × Height × Depth:
124 mm × 26 mm × 36 mm
Connectors:
GMSL/FAKRA (2)
Mounting mechanism:
– One 1/4‑20 UNC thread mounting point
– Two M4 thread mounting points
– Tripod
You can also check : Sale New Intel RealSense L515 LiDAR depth camera - Sealed Box
The D457 depth camera adds a GMSL serializer and FAKRA connector to the Intel RealSense camera product line. GMSL/FAKRA is a lower power, lower ESD/EMI noise, lower latency and longer cable length compared to USB and higher bandwidth compared to Ethernet.The camera integrates an IMU to allow your application to refine its depth awareness in any situation where the camera moves. This allows improved environmental awareness for robotics and drones.
Sale [ New ] Intel RealSense D455F depth camera - Best Price (D455F)
Twice the range.
Better performance.
Introducing the latest addition to the family, the Intel® RealSense™ Depth Camera D455. The D455 is the fourth in the D400 series, designed from feedback and knowledge gained from over 10 years of stereo camera development.
See further.
The D455 extends the distance between the depth sensors to 95 mm which improves the depth error to less than 2% at 4 m.
A perfect pair.
To improve the RGB image and the correspondence between the depth and RGB images, the RGB sensor includes a global shutter and is matched to the depth FOV.
An IMU inside.
The camera integrates an IMU to allow your application to refine its depth awareness in any situation where the camera moves. This allows improved environmental awareness for robotics and drones.
Longer range for better collision avoidance.
Faster moving autonomous robots require better and more accurate collision avoidance capabilities. A wide field of view and longer range depth camera makes operation in a changing environments easier and safer.
Tightly integrated RGB and depth streams for better quality scanning.
Adding a global shutter to the RGB sensor and increasing the field of view to match the depth allows for improved correlation between the color and depth information.
Longer range depth for touch free displays.
Interactive digital displays in public spaces are increasing in popularity. The longer range D455 provides reliable touch free gesture control and interaction from a greater distance.
Easy multi-camera setup for volumetric content creation.
Indoors or outdoors, multiple D455 cameras can be used together. A longer range allows for real‑time scene capture at up to 90 frames per second.
On-chip calibration in seconds.
Intel RealSense SDK 2.0 now provides an on‑chip self‑calibration option for your D455 stereo camera. This allows camera calibration in less than 15 seconds without the need for specialized targets. Hassle free!
Computer vision in robotics comes into focus.
In the last few years demand for computer vision technology that reliably works and performs across a variety of conditions has grown rapidly. Learn more about how robots see and understand the world.
Build once, deploy to any device.
The D455 uses the same open source Intel RealSense SDK 2.0 as all other current generation Intel RealSense Depth Cameras, which is platform independent, supporting Windows, Linux, Android and macOS. This includes wrappers for many common platforms, languages and engines.
TECHNICAL DATA :
Features
Use environment:
Indoor/Outdoor
Image sensor technology:
Global ShutterIdeal Range:
.6 m to 6 m
Inertial measurement unit:
Bosch BMI055
Depth
Depth technology:
Stereoscopic
Minimum Depth Distance (Min-Z) at Max Resolution:
~52 cm
Depth Accuracy:
<2% at 4 m1Depth Field of View (FOV):
87° × 58°
Depth output resolution:
Up to 1280 × 720
Depth frame rate:
Up to 90 fps
RGB
RGB frame resolution:
Up to 1280 × 800
RGB frame rate:
30 fps
RGB sensor technology:
Global ShutterRGB sensor FOV (H × V):
90 × 65°
RGB sensor resolution:
1 MP
Major Components
Camera module:
Intel RealSense Module D450
Vision Processor Board:
Intel RealSense Vision Processor D4
Physical
Form factor:
Camera Peripheral
Length × Depth × Height:
124 mm × 26 mm × 29 mm
Connectors:
USB‑C* 3.1 Gen 1*
Mounting mechanism:
– One 1/4‑20 UNC thread mounting point
– Two M4 thread mounting points
– Tripod
Also you can check : Sale New Intel RealSense D457 depth camera - Best Price
Better performance.
Introducing the latest addition to the family, the Intel® RealSense™ Depth Camera D455. The D455 is the fourth in the D400 series, designed from feedback and knowledge gained from over 10 years of stereo camera development.
See further.
The D455 extends the distance between the depth sensors to 95 mm which improves the depth error to less than 2% at 4 m.
A perfect pair.
To improve the RGB image and the correspondence between the depth and RGB images, the RGB sensor includes a global shutter and is matched to the depth FOV.
An IMU inside.
The camera integrates an IMU to allow your application to refine its depth awareness in any situation where the camera moves. This allows improved environmental awareness for robotics and drones.
Longer range for better collision avoidance.
Faster moving autonomous robots require better and more accurate collision avoidance capabilities. A wide field of view and longer range depth camera makes operation in a changing environments easier and safer.
Tightly integrated RGB and depth streams for better quality scanning.
Adding a global shutter to the RGB sensor and increasing the field of view to match the depth allows for improved correlation between the color and depth information.
Longer range depth for touch free displays.
Interactive digital displays in public spaces are increasing in popularity. The longer range D455 provides reliable touch free gesture control and interaction from a greater distance.
Easy multi-camera setup for volumetric content creation.
Indoors or outdoors, multiple D455 cameras can be used together. A longer range allows for real‑time scene capture at up to 90 frames per second.
On-chip calibration in seconds.
Intel RealSense SDK 2.0 now provides an on‑chip self‑calibration option for your D455 stereo camera. This allows camera calibration in less than 15 seconds without the need for specialized targets. Hassle free!
Computer vision in robotics comes into focus.
In the last few years demand for computer vision technology that reliably works and performs across a variety of conditions has grown rapidly. Learn more about how robots see and understand the world.
Build once, deploy to any device.
The D455 uses the same open source Intel RealSense SDK 2.0 as all other current generation Intel RealSense Depth Cameras, which is platform independent, supporting Windows, Linux, Android and macOS. This includes wrappers for many common platforms, languages and engines.
TECHNICAL DATA :
Features
Use environment:
Indoor/Outdoor
Image sensor technology:
Global ShutterIdeal Range:
.6 m to 6 m
Inertial measurement unit:
Bosch BMI055
Depth
Depth technology:
Stereoscopic
Minimum Depth Distance (Min-Z) at Max Resolution:
~52 cm
Depth Accuracy:
<2% at 4 m1Depth Field of View (FOV):
87° × 58°
Depth output resolution:
Up to 1280 × 720
Depth frame rate:
Up to 90 fps
RGB
RGB frame resolution:
Up to 1280 × 800
RGB frame rate:
30 fps
RGB sensor technology:
Global ShutterRGB sensor FOV (H × V):
90 × 65°
RGB sensor resolution:
1 MP
Major Components
Camera module:
Intel RealSense Module D450
Vision Processor Board:
Intel RealSense Vision Processor D4
Physical
Form factor:
Camera Peripheral
Length × Depth × Height:
124 mm × 26 mm × 29 mm
Connectors:
USB‑C* 3.1 Gen 1*
Mounting mechanism:
– One 1/4‑20 UNC thread mounting point
– Two M4 thread mounting points
– Tripod
Also you can check : Sale New Intel RealSense D457 depth camera - Best Price
Introducing the latest addition to the family, the Intel RealSense Depth Camera D455. The D455 is the fourth in the D400 series, designed from feedback and knowledge gained from over 10 years of stereo camera development.The D455 extends the distance between the depth sensors to 95 mm which improves the depth error to less than 2% at 4 m.
Sale [ New ] Intel RealSense D435i depth camera - Best Price (D435i)
Depth Camera D435i
Intel® RealSense™ depth camera D435i combines the robust depth sensing capabilities of the D435 with the addition of an inertial measurement unit (IMU).
Adding an IMU allows your application to refine its depth awareness in any situation where the camera moves. This opens the door for rudimentary SLAM and tracking applications allowing better point-cloud alignment. It also allows improved environmental awareness for robotics and drones. The use of an IMU makes registration and calibration easier for handheld scanning system use cases and is also important in fields such as virtual/augmented reality and drones. When using the D435i, our Intel RealSense SDK 2.0 provides IMU data that is time stamped to align with our high quality depth data.
What is an IMU?
The inertial measurement unit (IMU) is used for the detection of movements and rotations in 6 degrees of freedom (6DoF). An IMU combines a variety of sensors with gyroscopes to detect both rotation and movement in 3 axes, as well as pitch, yaw and roll. It is used in applications such as gaming and pointing devices as well as image stabilization.
Combined Solution for Development & Productization
The Intel® RealSense™ D435i places an IMU into our cutting‑edge stereo depth camera. With an Intel module and vision processor in a small form factor, the D435i is a powerful complete package which can be paired with customizable software for a depth camera that is capable of understanding it's own movement.
Ideal for cameras in motion
The combination of a wide field of view and global shutter sensor on the D435i make it the preferred solution for applications such as robotic navigation and object recognition. The wider field of view allows a single camera to cover more area resulting in less “blind spots”. The global shutter sensors provide great low‑light sensitivity allowing robots to navigate spaces with the lights off.
Complete Suite for Simple Integration
The depth camera D435i is part of the Intel® RealSense™ D400 series of cameras, a lineup that takes Intel’s latest depth‑sensing hardware and software and packages them into easy‑to‑integrate products. Perfect for developers, makers, and innovators looking to bring depth sensing to devices, Intel® RealSense™ D400 series cameras offer simple out‑of‑the‑box integration and enable a whole new generation of intelligent vision‑equipped solutions.
TECHNICAL DATA :
Features
Use environment:
Indoor/Outdoor
Image sensor technology:
Global Shutter
Ideal range:
.3 m to 3 m
Depth
Depth technology:
Stereoscopic
Minimum depth distance (Min‑Z) at max resolution:
~28 cm
Depth Accuracy:
<2% at 2 m1Depth Field of View (FOV):
87° × 58°
Depth output resolution:
Up to 1280 × 720
Depth frame rate:
Up to 90 fps
RGB
RGB frame resolution:
1920 × 1080
RGB frame rate:
30 fps
RGB sensor technology:
Rolling ShutterRGB sensor FOV (H × V):
69° × 42°
RGB sensor resolution:
2 MP
Major Components
Camera module:
Intel RealSense Module D430 RGB Camera
Vision processor board:
Intel RealSense Vision Processor D4
Physical
Form factor:
Camera Peripheral
Length × Depth × Height:
90 mm × 25 mm × 25 mm
Connectors:
USB‑C* 3.1 Gen 1*
Mounting mechanism:
– One 1/4‑20 UNC thread mounting point.
– Two M3 thread mounting points.
Also you can check : Sale New Intel RealSense D455F depth camera - Best Price
Intel® RealSense™ depth camera D435i combines the robust depth sensing capabilities of the D435 with the addition of an inertial measurement unit (IMU).
Adding an IMU allows your application to refine its depth awareness in any situation where the camera moves. This opens the door for rudimentary SLAM and tracking applications allowing better point-cloud alignment. It also allows improved environmental awareness for robotics and drones. The use of an IMU makes registration and calibration easier for handheld scanning system use cases and is also important in fields such as virtual/augmented reality and drones. When using the D435i, our Intel RealSense SDK 2.0 provides IMU data that is time stamped to align with our high quality depth data.
What is an IMU?
The inertial measurement unit (IMU) is used for the detection of movements and rotations in 6 degrees of freedom (6DoF). An IMU combines a variety of sensors with gyroscopes to detect both rotation and movement in 3 axes, as well as pitch, yaw and roll. It is used in applications such as gaming and pointing devices as well as image stabilization.
Combined Solution for Development & Productization
The Intel® RealSense™ D435i places an IMU into our cutting‑edge stereo depth camera. With an Intel module and vision processor in a small form factor, the D435i is a powerful complete package which can be paired with customizable software for a depth camera that is capable of understanding it's own movement.
Ideal for cameras in motion
The combination of a wide field of view and global shutter sensor on the D435i make it the preferred solution for applications such as robotic navigation and object recognition. The wider field of view allows a single camera to cover more area resulting in less “blind spots”. The global shutter sensors provide great low‑light sensitivity allowing robots to navigate spaces with the lights off.
Complete Suite for Simple Integration
The depth camera D435i is part of the Intel® RealSense™ D400 series of cameras, a lineup that takes Intel’s latest depth‑sensing hardware and software and packages them into easy‑to‑integrate products. Perfect for developers, makers, and innovators looking to bring depth sensing to devices, Intel® RealSense™ D400 series cameras offer simple out‑of‑the‑box integration and enable a whole new generation of intelligent vision‑equipped solutions.
TECHNICAL DATA :
Features
Use environment:
Indoor/Outdoor
Image sensor technology:
Global Shutter
Ideal range:
.3 m to 3 m
Depth
Depth technology:
Stereoscopic
Minimum depth distance (Min‑Z) at max resolution:
~28 cm
Depth Accuracy:
<2% at 2 m1Depth Field of View (FOV):
87° × 58°
Depth output resolution:
Up to 1280 × 720
Depth frame rate:
Up to 90 fps
RGB
RGB frame resolution:
1920 × 1080
RGB frame rate:
30 fps
RGB sensor technology:
Rolling ShutterRGB sensor FOV (H × V):
69° × 42°
RGB sensor resolution:
2 MP
Major Components
Camera module:
Intel RealSense Module D430 RGB Camera
Vision processor board:
Intel RealSense Vision Processor D4
Physical
Form factor:
Camera Peripheral
Length × Depth × Height:
90 mm × 25 mm × 25 mm
Connectors:
USB‑C* 3.1 Gen 1*
Mounting mechanism:
– One 1/4‑20 UNC thread mounting point.
– Two M3 thread mounting points.
Also you can check : Sale New Intel RealSense D455F depth camera - Best Price
The depth camera D435i is part of the Intel® RealSense™ D400 series of cameras, a lineup that takes Intel’s latest depth‑sensing hardware and software and packages them into easy‑to‑integrate products. Perfect for developers, makers, and innovators looking to bring depth sensing to devices, Intel® RealSense™ D400 series cameras offer simple out‑of‑the‑box integration and enable a whole new generation of intelligent vision‑equipped solutions.
- 1